Floriani’s Green Tearaway
NEW Eco Friendly Tearaway

Be the first to offer your customers a choice while doing your part in helping our environment! Floriani’s NEW Green Tearaway is a bio-degradable 2.0 oz tearaway and offers fantastic support for most embroidery designs on woven fabrics.

Floriani’s Green Tearaway is composed of natural renewable fibers that will break down when agitated in water. Enjoy its easy to remove capability from around satin stitches or designs without outlines. Simply moisten the back of the design once stitching is complete and then tearaway without distorting delicate embroidery!

Available in 8” x 8” and 12” x 12” pre-cut sheets or 15” x 100 yds

Floriani’s No Show Diamond Mesh

HOLDS MORE STITCHES!

Floriani's No Show "Diamond" mesh is a nylon mesh stabilizer with a perpendicular embossing pattern. It is more multi-directionally stable than previous versions. This will lead it to holding more stitches and to better and tighter registration or definition per single layer.

IT IS SOFT, SHEER & ALMOST INVISIBLE!

It is perfect for left chest applications, T Shirts & infant items. It will also stand up to repeated washings.

Floriani Perfect Stick Tearaway®

With Perfect Stick, embroidery in almost any area is achievable! Enjoy quality stitching with no residue build up or gummy needles. Perfect Stick is ideal for hard to hoop items such as bulky towels, backpacks, collars, napkin corners, or socks. Also use for fabrics that can be damaged by the hooping process, a.k.a. Hoop Burn; fabrics like leather, velvet, ultra-suede and satin. With Perfect Stick you will enjoy the stability of a firm yet flexible stabilizer that will support all types of embroideries on most fabrics.

Specifically designed for hard to hoop items! Wet N Stick® is an adhesive backed stabilizer that allows you to secure socks, neckties, bags, belts, bulky items and more so they can be easily and professionally embroidered. This unique stabilizer features a moisture activated adhesive on the back that will hold any item in place within the hoop. Avoid problems with peel-and-stick backing that will gum up
machine needles or messy spray adhesives that release harmful chemicals in to the air. Use the handy one inch grid lines to keep your design straight!

It’s simple to use and only requires lightly applying moisture with a damp sponge, rag, foam paint brush, or envelope sealer (sold at office supply stores). Make sure the adhesive side is up. Do not over wet it! Lay the blank item on top of the adhesive and smooth out any wrinkles; then embroider and trim.

Now available in Cutaway (Black or White) for when it is necessary to stick down an unstable stretch fabric such as chenille, fleece, stretch collars or sweater knit.

Medium Tearaway tears away cleanly to speed production and features a non-stretch, stable foundation. It can be used on any weight of woven with excellent results. Because it’s made of top-quality materials using the wet-laid-non-directional process, only one layer is needed
for most projects.

This product is easy to use. Once you’ve cut the appropriate size, it is hooped to the wrong side of the garment and sewn. Then securely rip off the excess edges from around the
embroidery.

This tearaway is the recommended product when extra stability (floating) is needed with any other Floriani stabilizers for stitching denser or larger designs

Floriani’s Heat N Sta® Tearaway 1.5 oz

Heat N Sta® is a fusible tearaway that is perfect for stabilizing lightweight woven fabrics (quilt quality cotton, fine linen, shirt weight denim, etc.) that tend to shift during thehooping and/or embroidery process.

To use: Fuse one layer of Heat N Sta® onto the back of the garment with a low temperature (260° F, silk setting) iron. Be sure the stabilizer is at least one inch larger than the outer parameter of the hoop to insure appropriate stabilization. Place the item in the hoop and embroider. Once the embroidery is complete, easily tear away the stabilizer!

Floriani’s Water Soluble Topping

When used as a topping on knits, terry cloth, fleece and other textured or high pile fabrics Water Soluble Topping creates a smooth embroidery surface. Stitches won’t sink into the fabric; giving crisp definition and detail to your work.

To use: Position one layer of the Floriani Topping on top of the garment once it has been hooped, secure with tape or pins. Embroider the design. Once the stitching is complete, tear away as much of the topping as possible. Any remnants can be removed with a damp cloth, sponge or steam from an iron.

Floriani’s Stitch N Shape®

Creative opportunities are limitless with this remarkable product! Use Stitch N Shape when creating tote-bags,purses, placemats, fabric bowls/boxes, paper dolls and hat brims, etc for the ultimate in firmness yet shapeable flexibility. Use the fusible versions to apply fashion fabric to one or both sides! You can stitch or embroider directly through it! Stitch N Shape® is wash and dry friendly and can be reshaped by steaming. Create unique picture frame mats by painting, stitching, or embellishing directly on it. Try our plain, single or double fusible versions for your next craft or special embroidery project!

Floriani’s Cutaway Ultra Heavy 3oz

For your heavy-duty jobs, Floriani’s Cutaway Heavy will keep stitches from disappearing in fleece, knits, and sweaters. It offers a non-stretching base to ensure that the embroidery holds its shape for the life of the garment, whether a medium or heavy stitch density is used. You only need one layer for most applications. It’s also ideal for home decorating projects such as pillows and upholstery or use as a perfect firm lining for purses and tote-bags. Hoop one layer alone and stitch out your embroidery designs so you will have an accurate “sew out” before you embroider a garment! Trim closely and create a patch or appliqué!

Floriani’s Dream Weave® Fusible

When adding embroidery to your most delicatefabrics such as silk, satin, taffeta, lycra/spandex, chamois, etc. you can experience sheering or shredding. This occurs because the delicate fibers of the fabric are not strong enough to handle the constant needle penetration that occurs while embroidering. By fusing Dream Weave® to the back of the fabric before embroidery, it gives the garment body and the ability to handle heavier embroidery designs without changing the drape of the fabric. Because it is a permanent fuse, Dream Weave® is ideal for lining all types of fabrics in suiting and regular sewing or fuse it over the back of an
embroidered design to cover scratchy stitches!

*This product is not a stabilizer; it is an important step to preparing delicate fabrics for embroidery.

Floriani’s Wet N Gone®

This fibrous water soluble product is a superb choice for all lace work, free standing embroideries and/or appliqués such as flower pins, paper dolls, etc. Once the embroidery is complete, trim away any excess stabilizer, rinse it in water; the design is all that remains! Submerging is also an
acceptable method of stabilizer removal. One layer should be sufficient for most designs. Wet N Gone® is noted for its clean rinse which results in a soft embroidery that can be worn against the skin.

Fusible and Tacky versions by special order only.

Floriani’s Heat N Gone® Topping/Stabilizer

Use this remarkable 100% heat removable film as a topping or stabilizer on all fabrics that can withstand an iron temperature of 260°–300° F (120°-140° C). Great when when your fabric cannot withstand moisture - for example a velvet fabric. Trace intricate quilt patterns or designs that you want to free motion stitch for a perfect guide to follow on top of the fabric! Also an excellent choice for built in machine stitches such as quilting or heirloom.

To use as a topping:
Place a piece of Heat N Gone® on top of the hooped item, bumpy side down, and secure with pins or tape. Once the embroidery is complete, tear away as much of the Heat N Gone® as possible. Place your heated iron to the top of the garment to remove the excess stabilizer. Be sure your iron temp is a least 260° F (120°C).

To use as a stabilizer:
Place a piece of Heat N Gone® within the hoop with the item to be embroidered. Use a piece at least one inch larger than the outer
perimeter of the hoop. The bumpy side of the stabilizer should be against the fabric. Once the embroidery is complete, tear away as much of the Heat N Gone® as possible. Follow the steps above for removing any remnants left around the design.

Floriani’s Stitch N Wash® 1.5 oz

Stitch N Wash® is ideal for open work type embroidery, decorative and/or heirloom stitching on light weight cottons, batiste and linen. It’s unique because it is made up of both soluble and non-soluble fibers. By wetting the design or stitching once it is complete, Stitch N Wash® is easily torn away without distorting stitches or harming the delicate
fibers of heirloom quality fabrics. Any soluble-fiber remnants will go away once the garment is laundered. The non-soluble fibers will stay within the embroidery even after washing.

This product is not recommended as a topping.

Floriani’s Cutaway Medium 2oz

When stability is the priority, one layer of Floriani’s
Cutaway Medium offers the no-stretch properties you need to provide support for designs larger in size and with a
medium/high stitch count on most weights of knits, sweaters and wovens.

Floiani Cutaway Heavy 2.5 oz

This is the product you will want to use with high stitch counts on most weights of knit sweaters and wovens.

Floriani’s Heat N Sta Fleece®

Add dimension to your embroidery and quilting projects with Floriani Heat N Sta Fleece®. Create soft home dec items such as placemats, table runners and crib quilts. This unique product is similar to traditional quilt batting only with a fusible side to keep the fleece in place while stitching through it! Heat N Sta Fleece® is ideal for machine embroidered or T-Shirt quilts as it does not have to be quilted to maintain the fibers of the batting. It is machine washable, dryer and/or drycleaner safe.
Perfect for trapunto embroidery - also adds extra richness to lower end fabrics.

Floriani’s No Show Nylon Mesh 1.5 oz

One of the most difficult problems with traditional cut away stabilizers is having the ugly square show through light colored fabrics. This problem is solved with No Show Nylon Mesh which is made of soft, sheer, translucent embossed nylon. This versatile mesh does not require multiple layers, which adds bulk. It is invisible to the eye when viewed from the front.

This product is also used to stabilize delicate fabrics such as silk and satins for embroidery and handwork.

Colors include white, black and beige. Fusible versions by special order only.

Floriani’s Appli-kay Wonder®

Turn your embroidery designs into appliqués or patches with Floriani’s Appli-kay Wonder®. This fusible webbing has a pressure sensitive side for easy re-positioning. Use to create beautiful traditional appliqué for quilts, home dec and garments.

To use: Trace your image or shape onto the protective release paper side of Appli-kay Wonder®. Fuse the soft side of the product to the wrong side of the fabric or item to be appliquéd. Cut out the shape and peel back the release paper, this exposes the sticky side. Position the appliqué as many times as you need and then press in to place for a permanent bond. Finish with a satin or decorative machine stitch.